Products

Products

High Voltage Steel Pipe Transmission Tower
  • High Voltage Steel Pipe Transmission TowerHigh Voltage Steel Pipe Transmission Tower
  • High Voltage Steel Pipe Transmission TowerHigh Voltage Steel Pipe Transmission Tower

High Voltage Steel Pipe Transmission Tower

As a reliable China manufacturer and factory supplier of high voltage steel pipe transmission tower, Qingdao Anbang New Energy produces round-section power towers for 10kV–750kV overhead transmission lines. Our in-house fabrication workshop supports custom design, precision CNC processing and hot-dip galvanizing for global power EPC buyers.

High Voltage Steel Pipe Transmission Tower

The high voltage steel pipe transmission tower features uniform steel distribution, good aerodynamic performance and compact footprint. It is widely selected for urban narrow corridor projects, typhoon-prone coastal zones and new energy outgoing transmission lines. We support custom design, CNC precision machining, first-piece trial assembly, third-party witnessing inspection and complete technical document delivery. Send your project parameters and drawings to get factory quotation within 24 hours.

Round closed cross-section distributes steel evenly around the axis, eliminating weak axis and reducing wind drag compared with angle lattice tower. It delivers stable structural performance under strong wind and typhoon conditions. We set diameter-to-thickness ratio based on slenderness and local buckling check, instead of simply increasing wall thickness; stiffener rings will be applied at door openings and flange positions to control cost while maintaining rigidity.

Our design output includes tower general arrangement drawing, foundation plate & anchor bolt drawing, segment marking drawing and erection instruction. We align civil foundation drawing with tower main structure drawing to avoid version mismatch for your civil contractor.

Parameter

Parameter Standard Working Range Custom Range
System Voltage 220kV – 500kV 10kV – 750kV
Structure Height 15m – 80m 10m – 120m
Design Wind Speed 25 – 35 m/s Up to 50 m/s
Main Steel Grade Q355B / ASTM A572 Q420B, Q460, S355JR
Surface Treatment Hot-dip galvanizing to ASTM A123 Galvanizing + powder coating
Connection Type Flanged bolted joint Slip joint, site welded splice
Welding Standard AWS D1.1 / GB 50205 Adjusted to IEC, regional national codes

How is hot-dip galvanizing and anti-corrosion handled for high-salt projects?

Corrosion failure is the top risk for long-term running overhead towers, especially for coastal splash zones, desert sand scour and humid tropical environments. Anbang shares ownership in a dedicated galvanizing plant, so we control coating quality and delivery schedule independently, instead of outsourcing to third parties.

All steel plates and welded assemblies go through pre-treatment before galvanizing. For closed tubular sections, we weld end cap plates and reserve drain holes before final closure; internal coating of the base section is finished at factory to avoid unreachable hidden corrosion inside tubes after erection. Zinc thickness follows ASTM A123 and GB/T 13912. For high corrosive marine environments, we offer optional extra powder coating on galvanized surface for extended service life.

Critical welding components such as stiffener rings and door frames are welded before galvanizing. We avoid field welding on coated sections, as site repair cannot restore anti-corrosion performance to factory standard.

Lead Time, Packing and Site Lifting Support

High Voltage Steel Pipe Transmission Tower

Lead time is determined mainly by steel material availability and drawing confirmation. Q355B steel is kept in regular stock; high-strength grades Q420B / Q460 require special ordering, which extends production cycle.

Each high voltage steel pipe transmission tower is split into transportable segments, normally under 8 m, with single-piece weight matched to common 25-tonne on-site crane capacity. We supply lifting scheme with centre-of-gravity marking for each segment to prevent bending during hoisting. All segments are printed with unique match numbers on both ends; parts are bundled and nested on truck rather than stacked to avoid deformation. Bolts and small fittings are packed in separate waterproof boxes.

We export through Qingdao port, and can prepare packing, marking and shipping documents for sea freight. For mountainous sites with narrow access roads, we adjust segment length at quotation stage to fit local transport constraints.

Before Placing the Order, Please Confirm the Materials

To help us deliver accurate engineering calculation, drawing review and formal quotation within 24 hours, please prepare below project data:

1. System voltage, tower type (tangent / tension / corner / terminal)
2. Design wind speed, ice load, seismic requirement and local design code
3. Conductor, OPGW parameters, span and deviation angle
4. Terrain condition: urban roadside, coastal, mountain, desert
5. Steel grade, anti-corrosion requirement, preferred connection method
6. Quantity and delivery schedule requirement
7. Foundation restriction or right-of-way limit if available

About Us

Qingdao Anbang New Energy, founded in 2014 and State-Grid approved, manufactures high voltage steel pipe transmission tower for overhead power transmission.

Our 150,000 m² Jiaozhou production base owns full-chain fabrication equipment and invested hot-dip galvanizing workshop, certified by ISO 9001, ISO 14001, ISO 45001, ISO 50001.

We hold authoritative test certificates for 220kV, 500kV and 750kV steel tower structures, with export delivery experience to Asia, Africa and other overseas power markets.

High Voltage Steel Pipe Transmission Tower High Voltage Steel Pipe Transmission Tower

FAQ

Q1: When is a high voltage steel pipe transmission tower better than angle steel lattice tower?

A: Tubular tower is preferred when your corridor space is limited, foundation bearing capacity is weak, or the site faces high wind / typhoon risk. Its compact base greatly reduces land occupation for urban roadside and densely populated zones.

Q2: Can you design the high voltage steel pipe transmission tower according to our national standard or IEC?

A: Yes. Our engineers adjust structural calculation, welding specification and inspection requirements to match IEC, ASTM or your local grid standards. Please share your technical specification at enquiry.

Q3: Do you accept third-party inspection before shipment?

A: We fully support third-party witness inspection, including material check, dimension survey, weld UT test, galvanizing inspection and trial assembly witnessing. All test records can be released for the inspector.

Q4: Are tower joints bolted on site or field welded?

A: Standard design adopts bolted flange connection or slip joint to minimize field welding. Field welding is avoided as it brings anti-corrosion repair risk and relies on stable weather conditions. All segments are marked with matching numbers for easy erection.

Q5: What is your typical production lead time?

A: After drawing confirmation and deposit receipt: Q355B stock steel about 4 weeks; high-strength Q420B / Q460 steel around 8–10 weeks. Complex multi-circuit or heavy-load towers will be confirmed separately in quotation.

Q6: What is the service life of hot-dip galvanized tubular tower?

A: Under normal atmospheric environment, properly galvanized steel tower can serve 40+ years. For coastal salt-spray areas, extra coating options are recommended to extend anti-corrosion lifespan.

Send Inquiry
Contact Info
  • Address

    No. 46 Shandong Road, Beiguan Industrial Park, Jiaobei Subdistrict, Jiaozhou City, Qingdao, Shandong Province, China

Anbang is a professional manufacturer and supplier in China. Our factory provides steel pipe tower, signal tower, single arm traffic pole, etc. If you are interested in our products, you can inquire now, and we will get back to you promptly.
X
We use cookies to offer you a better browsing experience, analyze site traffic and personalize content. By using this site, you agree to our use of cookies. Privacy Policy
RejectAccept